Billet automatic torch cutting machine, divided into FG and YG two major series, has dozens of products. As follows the main structures and characteristics of the product.
1. FG-type Series Billet Automatic Torch Cutting Machine
FG-type Series Billet Automatic Torch Cutting Machine has FG-1, FG-2, FG-3, FG-4 four classes. Its main characteristics as follows:
· The machine and the torch gun have no power. So FG-type Series Billet Automatic Torch Cutting Machine is called “no power” type cutting machine.
· The speed of torch cutting gun will change when the speed of continuous casting changes.
FG-3 is recommended in all “no power” type cutting machines. FG-3 type has done greater improvement in three following parts mainly:
· The special edge surveying
· Practical , reliable
· Effective water-cooling system
2. YG-type Series Billet Automatic Torch Cutting Machine
YG-type Series Billet Automatic Torch Cutting Machine has YG-3, YG-5, YG-6 three classes. Its main characteristics as follows:
· Swing of the cutting gun and return of the machine are drove by motor. So YG-type Series Billet Automatic Torch Cutting Machine is called “power” type cutting machine.
· The speed of cutting is adjustable through Frequency conversion.